KING WiFiMax KWM2000 User Manual

Page 1
Wi-Fi Extender KWM2000
(included with KS1000)
(not included with KWM2000)
Omnidirectional Wi-Fi Antenna KS1000
SWIFT
The KING WiFiMax creates your own private and secure Wi-Fi
network, just like you have in your home. When in range of an
available network, simply congure your WiFiMax to connect to that
network, and it will extend the internet access from that network to
your own private Wi-Fi network.
The KING Swift is an omnidirectional Wi-Fi antenna
that increases the range and performance of your
KING WiFiMax router and range extender. This
2.4GHz Wi-Fi antenna mounts to your roof, connects
to your KING WiFiMax via a single cable, and allows
your KING WiFiMax to connect to networks from
even farther away and still utilize its 5GHz network for
fastest speeds.
CONTENTS
CONTENTS ................................................................................................. 2
CONNECTIONS .......................................................................................... 3
FIRST-TIME USE ..................................................................................... 4-7
STANDARD OPERATION ..................................................................... 8-11
INSTALLATION ................................................................................... 12-13
TROUBLESHOOTING .............................................................................. 14
SPECIFICATIONS .................................................................................... 15
LIMITED WARRANTY .........................................................................16-17
WIRELESS REGULATORY INFORMATION .......................................18-19

KING WiFiMax KWM2000 Specifications

General

Brand	KING
Model	WiFiMax KWM2000
Category	Extender
Language	English

Summary

Connections

Attach Antenna or Swift Cable

Connects the dipole antenna or KING Swift cable to the WiFiMax open port.

Position Antennas

Rotate antennas to point upwards for optimal signal reception.

Connect to Power

Plug the KING WiFiMax into a standard 110 VAC power outlet.

First-Time Use

Connect to KING 5G Network

Connect your smart device to the KING WiFi 5G network.

Access Setup Portal

Open a web browser and navigate to http://mykingwifi.com.

Configure WiFi Settings

Navigate to WiFi Settings and then to WiFi Name & Password.

Set Wi-Fi Name and Password

Personalize your network name and set a secure password.

Save Network Configuration

Save the personalized Wi-Fi name and password settings.

Standard Operation

Connect to Personalized Network

Connect your device to your newly configured KING WiFi network.

Access Wireless Repeating Setup

Navigate to WiFi Settings and select Wireless Repeating.

Scan for Upstream Networks

Initiate a scan to find available networks to extend.

Select Upstream Network

Choose the desired network to extend from the scanned list.

Enter Upstream Network Password

Input the password for the selected upstream network.

Reboot to Apply Settings

Confirm and reboot the router to activate the wireless repeating settings.

Installation

Prepare Roof Entry Point

Drill a 5/16" hole in the roof for cable entry.

Connect Cables

Connect the KING Swift cable to the main long cable.

Mount and Seal Bracket

Apply sealant around the bracket and cable entry for weatherproofing.

Install Interior Components

Connect the cable to the KING WiFiMax and install the wall plate.

Troubleshooting

No Power or Lights

Check power supply connection and outlet if the WiFiMax does not power on.

Cannot Find Network

Ensure WiFiMax is plugged in and allow time for networks to appear.

Cannot Connect to mykingwifi.com

Verify connection to KING WiFiMax and check web address spelling.

Stuck During Reboot

Reload the page or re-verify device connection if the router is stuck at 100%.

Poor Range or Signal

Adjust antenna orientation and check for obstructions reducing signal.

Specifications

KING WiFiMax Specifications

Details power, wireless standards, frequencies, and security for WiFiMax.

KING Swift Specifications

Details radio band, wireless standards, antenna, height, diameter, and weight.

Limited Warranty

Warranty Coverage and Period

Details one-year parts warranty and responsibilities for repairs.

Obtaining Warranty Service

Instructions for contacting KING and returning products for service.

Warranty Exclusions

Lists conditions and actions that are not covered by the warranty.

Wireless Regulatory Information

FCC Compliance Statement

States compliance with FCC rules and measures to avoid interference.

Radiation Exposure Limits

Specifies minimum installation distance for RF exposure compliance.

Canadian Regulatory Statements

Details compliance with Innovation, Science and Economic Development Canada.

5 GHz Band Restrictions

Notes indoor usage requirements and potential radar interference.