1. Heat selection (I) 750W (II) 1250W (III) 2000W
2. Power indicator light
3. Thermostat control
4. Timer
5. Carry handles
6. Turbo fan
Assembly of the Heater
Before using the heater, the feet (supplied separately in the carton), must be fitted. These are to be
attached to the base of the heater using the 4 self-tapping screws provided, taking care to ensure
that they are located correctly in the bottom ends of the heater side mouldings.
Returns and Warranty
Should your appliance not work or is damaged when you first take it out of the carton, return it to
the retailer with the packaging and proof of purchase.
Read these instructions carefully, failure to comply could damage the appliance and may render any
actual or implied guarantee void. Keep this manual for further reference.
Rated Voltage: 220-240V ~ 50Hz
Rated Power: 2000W
To Next Page
Loading...
