TROUBLE SHOOTING
QUICK JAMMING RELEASE
1) Release Staple Feeder from Staple Channel (see OPERATION page 7).
2) Push Open/Lock Switch upward this will release Staple Channel (photo 6)
3) Open Staple Channel to remove jammed staples (photo 7).
4) Close Staple Channel and push down Open/Lock Switch. Lock will click ensuring that
the lock switch is in locked position (photo 8).
ENVIRONMENTAL PROTECTION
If the tool should no longer work at all, please make sure that it is disposed in an
environmentally friendly way, by handing it into a public collection point. Please do not
put it with your household waste.
8
To Next Page
Loading...