KINGFISHER
O W N E R ’ S M A N U A L
w w w . k i n g f i s h e r b o a t s . c o m
32
Fuse Panel:
The fuse panel is located on the carpeted bulkhead underneath the dash.
A fuse panel label is located under the dash console. This label shows the location of the
fuses for each option.
Example of a fuse panel layout
When a fuse is suspected to be blown, the following procedure should be followed:
Turn off the component or appliance
Turn the battery switch to the off position
Locate and remove the blown fuse
Replace the blown fuse
Turn on the battery switch to the desired location
Turn on the component or appliance
IMPORTANT: If a fuse burns out continually, consult your authorized Kingfisher dealer.
NOTE: As part of the pre-trip safety check list, it is a good idea to make sure that there is
a selection of spare fuses on board that can be used in case of emergency.
To Next Page
Loading...