FPHPC100
Before you start
Getting started...
GB
IE
18
Connection to power supply
> Make sure the on/off switch (6) is in its off position (“0”).
> Connect the plug (7) with a suitable socket.
WARNING! Check the voltage! The voltage must comply with the
information on the rating label!
If using an extension cord it must be suitable for outdoor use with
sockets protected against water splashing. Ensure the extension cord
is of the proper size and type for your product 1.5 mm
2
)! Always use
a residual current device (RCD) protected supply.
> Your product is now ready to be used.
18
18
To Next Page
Loading...
