To Next PageTo Next PageWhat to do if my Kingfisher FPHPC100 has no water jet?
If your Kingfisher Pressure Washer isn't producing a water jet, there are several possible reasons. First, make sure the trigger is pressed and the trigger lock is deactivated. Also, verify that there is a water supply connected. Check the filter for any dirt or blockages, and inspect the hose and nozzle for blockages as well.
How to fix a Kingfisher Pressure Washer that does not start?
If your Kingfisher Pressure Washer isn't starting, begin by ensuring it's properly connected to a power supply. If it's connected, a specialist electrician should check the power cord or plug for defects. You can also ask a specialist electrician to check by a i li t l t i i .
What causes strong pressure fluctuations in my Kingfisher FPHPC100?
Strong pressure fluctuations in your Kingfisher Pressure Washer can be caused by a blocked nozzle, which you should clean. Also, ensure that the water inlet volume is sufficient; if it's too low, increase the water inlet quantity. Finally, a leaking pressure hose can also cause this issue, and it should be replaced.
What to do if my Kingfisher Pressure Washer is leaking water?
Small leakages in the Kingfisher Pressure Washer related to its technical conditions are normal. However, in case of strong leakage, have an electrician examine it.
Why is my Kingfisher FPHPC100 Pressure Washer not reaching full power?
General| Maximum Pressure | 100 bar |
|---|---|
| Voltage | 220-240V |
| Hose Length | 5m |
| Nozzle Included | Yes |
| Flow rate | 6 L/min |
Crucial safety instructions, warnings, and precautions for safe operation.
Important legal notices and disclaimers regarding product usage.
Overview of the product components and identification labels.
Essential steps and procedures before operating the product, including assembly.
Detailed explanation of the product's features and intended use.
Step-by-step guide on how to operate the product safely and effectively.
Instructions for cleaning, maintenance, and checking for wear and tear.
Guide to identify and resolve common problems and malfunctions.
Information on how to properly recycle and dispose of the product.
Details about the product warranty, coverage, and exclusions.
Statement confirming the product's compliance with EU directives.
