GB
IE
22
In more detail...
FPHPC100
GB
IE
Product functions / Operation
Trigger lock
Deactivate the trigger lock
> When the trigger lock (2b) is in the unlocked position, the spray gun trigger (2c)
will be enabled and ready for use(Fig. 16).
2b
2c
2b
2c
Fig. 15, locked position, the trigger is
disabled
Fig. 16, unlocked position, the trigger
is enabled
General operation
> Check the product, its power cord and plug as well as accessories for damage
before each use. Do not use the product if it is damaged or shows wear.
>
> Always hold the product on its handles. Keep the handles dry and free from
lubricant to ensure safe support.
> Ensure that the air vents (10) are always unobstructed and clear. Clean them
if necessary with a soft brush. Blocked air vents may lead to overheating and
damage the product.
> Switch the product off immediately if you are disturbed while working by other
people entering the working area. Always let the product come to complete
stop before putting it down.
> Do not overwork yourself. Take regular breaks to ensure you can concentrate
on the work and have full control over the product.
22
22
To Next Page
Loading...
