Kingfisher FPHPC100 - Page 31

GB
IE
31
In more detail...
FPHPC100
GB
IE
Troubleshooting
Problem Possible cause Solution
2. Product does
not reach full
power
2.1 Extension cord
not suitable for
operation with this
product
2.2 Power source (e.g.
generator) has a too
low voltage
2.3 Air vents are
blocked
 ,QVXI¿FLHQWZDWHU
supply
2.5 Filter is dirty
2.6 Hose partly blocked
2.7 Nozzle partly
blocked
2.1 Use a suitable
extension cord
2.2 Connect to another
power source
2.3 Clean the air vents
2.4 Check water supply
 &OHDQ¿OWHU
2.6 Check hose
2.7 Check nozzle(1a)
3. No water jet 3.1 Trigger is not
pressed
3.2 Trigger lock is
activated
3.3 No water supply
3.4 Filter is dirty
2.5 Hose blocked
3.6 Nozzle blocked
3.1 Press the
trigger(2c)
3.2 Deactivate the
trigger lock(2c)
3.3 Check water supply
 &OHDQ¿OWHUE
3.5 Check hose
3.6 Check nozzle(1a)
4. Strong
pressure
ÀXFWXDWLRQV
4.1 Nozzle is blocked
4.2 Water inlet volume is
too low
4.3 Pressure hose is
leaking
4.1 Clean the
nozzle(1a)
4.2 Increase water inlet
quantity
4.3 Replace pressure
hose(3)
5. Water leakage
from product
5.1 Small leakage in the
product related to its
technical conditions
are not a problem
5.1 Have electrician
examine in case of
strong leakage
6. Excessive
vibration/noise
6.1 Screw and nuts
loosened
6.2 Motor problems
6.1 Check screws and
nuts for tightness
and re-tighten as
necessary
6.2 Have the product
examined by
TXDOL¿HGHOHFWULFLDQ
31
31