Kingfisher MQS2800-3 User Manual (English)

Questions and Answers:

G
Gabrielle HaysAug 11, 2025
What to do if my Kingfisher MQS2800-3 does not start?
- W
  William HayesAug 11, 2025
  If your Kingfisher Paper Shredder doesn't start, first ensure it's properly connected to a power supply and that the power indicator turns red; if not, reconnect the plug. Check the interlock switch of the collection box to be sure it is locked. If these steps don't resolve the issue, it could be due to a defective power cord or another electrical problem, which should be inspected by a qualified electrician. Also, overload protection might be activated.
T
trevorstevensAug 17, 2025
Why is my Kingfisher Paper Shredder not reaching full power?
- J
  Jared EsparzaAug 17, 2025
  If your Kingfisher Paper Shredder isn't reaching full power, it could be due to several reasons. First, ensure you're using a suitable extension cord. If you're using a generator, try connecting to a different power source with adequate voltage. Also, check the air vents and clean them if they are blocked. Finally, make sure the collection box isn't full; if it is, empty it.
D
David ChavezAug 23, 2025
What to do if my Kingfisher Paper Shredder motor sounds but does not start?
- B
  Brooke ValenzuelaAug 23, 2025
  If the motor of your Kingfisher Paper Shredder sounds but doesn't start, the cutting blades might be blocked. Also check that the forward/reverse switch is set to either the forward or reverse position, not the middle. Ensure the blade compartment guard is correctly fixed.
E
Elizabeth FordAug 30, 2025
Why is my Kingfisher Paper Shredder making excessive vibration or noise?
- S
  Stephanie MillsAug 30, 2025
  Excessive vibration or noise in your Kingfisher Paper Shredder can be caused by worn or damaged cutting blades; these should be replaced by a specialist. It may also be caused by blocked cutting blades, which you should unblock. Loose bolts or knobs can also cause this issue; tighten them.
E
Eric PowellSep 4, 2025
How to fix unsatisfactory shredding from my Kingfisher MQS2800-3?
- A
  Amanda HayesSep 4, 2025
  If your Kingfisher Paper Shredder is not cutting cleanly, the cutting plate may need adjustment. Alternatively, the cutting blades could be worn or damaged and require replacement by a specialist.

Kingfisher MQS2800-3 Specifications

General

Brand	Kingfisher
Model	MQS2800-3
Category	Paper Shredder
Language	English

Kingfisher MQS2800-3 User Manual

Table of Contents

Questions and Answers:

Kingfisher MQS2800-3 Specifications