Kingfisher NMGT18-Li - User Manual

Questions and Answers

V
vstephensAug 7, 2025
Why my Kingfisher Trimmer does not start?
- T
  Tracy GreerAug 7, 2025
  Your Kingfisher Trimmer might not be starting due to several reasons: the battery pack may not be properly attached (ensure it is securely attached), the battery pack could be discharged (remove and charge the battery), or the battery pack might be damaged (replace it with a new one of the same type). Another potential cause is an electrical defect in the product, which should be checked by a specialist electrician.
J
jason17Aug 14, 2025
What to do if my Kingfisher NMGT18-Li Trimmer has excessive vibration or noise?
- T
  thomasarmstrongAug 14, 2025
  Excessive vibration or noise in your Kingfisher Trimmer can stem from a few issues. The trimmer head might be damaged (replace it with a new one), a screw could be loose (tighten the screw), or the trimming line might be worn or damaged (replace it with a new one).
M
michael55Aug 22, 2025
How to fix a Kingfisher NMGT18-Li that does not reach full power?
- M
  Matthew FergusonAug 22, 2025
  If your Kingfisher Trimmer isn't reaching full power, it could be due to a low battery pack capacity (charge the battery pack). Another possibility is that the air vents are blocked (clean the air vents).
K
Kathleen DavisAug 30, 2025
Why my Kingfisher NMGT18-Li Trimmer gives an unsatisfactory result?
- M
  Mary CochranAug 30, 2025
  An unsatisfactory result with your Kingfisher Trimmer may be because the trimming line is worn or damaged. Replace it with a new one to resolve this.