Kingfisher NMLM18-Li - User Manual

Questions and Answers

J
Jason TannerAug 7, 2025
Why does my Kingfisher NMLM18-Li not start?
- A
  Amy BishopAug 7, 2025
  If your Kingfisher Lawn Mower doesn't start, there could be several reasons: * The battery pack might not be properly attached; ensure it is securely connected. * The battery pack could be discharged; remove it and charge it fully. * The battery pack might be damaged; have it checked by a specialist electrician. * There could be another electrical defect; have the product inspected by a specialist electrician. * The safety key might not be properly inserted; make sure it is correctly in place.
K
Karen SmithAug 13, 2025
What to do if my Kingfisher Lawn Mower suddenly stops?
- I
  iwhiteAug 13, 2025
  If your Kingfisher Lawn Mower suddenly stops, it could be due to a few reasons: * The battery pack may be discharged; remove and charge it. * The battery pack might be too hot; remove it and allow it to cool down. * The cutting device could be blocked; remove any obstructions.
K
Katie BurkeAug 19, 2025
Why is my Kingfisher Lawn Mower not reaching full power?
- D
  davismichaelAug 19, 2025
  If your Kingfisher Lawn Mower is not reaching full power, it could be due to the following: * The battery pack capacity might be too low; charge the battery pack. * The air vents could be blocked; clean the air vents to ensure proper airflow.
A
Adam JeffersonAug 25, 2025
Why is my Kingfisher NMLM18-Li making excessive noise and vibration?
- G
  Gail ValdezAug 26, 2025
  If you are experiencing excessive vibration or noise with your Kingfisher Lawn Mower, consider these potential causes: * The cutting device may be damaged; replace it with a new one. * The cutting material might exceed the mower's capacity; only cut materials within the specified limits. * The cutting height may be incorrect; adjust it to the appropriate level.
M
Michelle VelezAug 31, 2025
How to improve the cutting result of my Kingfisher Lawn Mower?
- D
  Daniel GreenAug 31, 2025
  If the cutting result of your Kingfisher Lawn Mower is unsatisfactory, it could be due to these reasons: * The cutting device is damaged; replace it with a new one. * The cutting material exceeds the capacity; only cut materials according to the product capacity. * The cutting height is incorrect; adjust the cutting height.