03
Install the latch and strike
1. Insert the latch bolt into the door.
2. Install strike on the door frame.
Twist the latch and adjust the bolt length.
(Make sure the latch bolt is retracted).
up
YES
up
NO
Make sure t he
is in the bottom position.
T-shaped hole
No adjustment is required.
Proceed to next step.
Make sure the hole in the door
frame is drilled a minimum of
1"(25mm)deep.
YES
NO
NO
up
Customer Support:
Phone:+1 833 553 0460
Email:support@kingforceusa.com
2
To Next Page
Loading...