Do you have a question about the Kinghome KW09HUCA4D and is the answer not in the manual?
Provides a brief overview of the air conditioner models and components.
Details technical specifications for the indoor and outdoor units.
Presents performance curves related to compressor speed and current.
Shows how cooling and heating capacity varies with outdoor temperature.
Lists operational data for cooling and heating modes at rated frequency.
Illustrates noise levels for indoor and outdoor units at different operating speeds.
Provides diagrams showing the physical dimensions of the unit.
Displays the physical dimensions of the indoor air conditioning unit.
Displays the physical dimensions of the outdoor air conditioning unit.
Illustrates the flow of refrigerant within the air conditioning system.
Covers the electrical components and diagrams of the unit.
Shows the electrical connections for indoor and outdoor units.
Provides visual layouts of the Printed Circuit Boards (PCBs).
Details the operational functions and control methods of the unit.
Explains the functions and buttons of the remote controller.
Guide for operating the air conditioner using the GREE+ mobile application.
Guide for operating the air conditioner using the Ewpe Smart mobile application.
Details the various operating modes of the air conditioner.
Describes functions like timers, auto mode, sleep, turbo, and X-fan.
Details specific advanced functions like RF control and I Feel.
Lists common error codes and their potential causes.
General safety precautions and important notes before installation.
Lists the essential tools required for installation and maintenance tasks.
Guidance and procedures for installing the air conditioning unit.
Illustrates the required clearances for unit installation.
Checklist for verifying all necessary installation parts are present.
Guidelines for choosing an appropriate location for unit installation.
Specifies the electrical requirements for connecting the unit.
Step-by-step instructions for installing the indoor unit.
Step-by-step instructions for installing the outdoor unit.
Procedures for vacuuming the system and checking for refrigerant leaks.
Final checks and operational tests after installation is complete.
Procedures and information for maintaining the air conditioning unit.
Comprehensive list of error codes and their possible causes.
Diagnostic flowcharts for identifying and resolving malfunctions.
Troubleshooting steps for IDU fan motor blockage errors.
Troubleshooting steps for jumper cap protection errors.
Troubleshooting steps for overcurrent protection errors.
Troubleshooting steps for communication errors between units.
Troubleshooting steps for WIFI detection plate malfunctions.
Troubleshooting steps for capacity charging issues in outdoor units.
Troubleshooting steps for IPM, desynchronizing, and phase current issues.
Troubleshooting steps for high temperature and overload protection.
Troubleshooting steps for unit start-up failure.
Troubleshooting steps for overload and high discharge temperature issues.
Troubleshooting steps for communication malfunctions.
General troubleshooting for common operational issues.
Steps to resolve issues when the air conditioner fails to start.
Steps to resolve issues with insufficient cooling or heating performance.
Steps to resolve issues with the horizontal louvers not moving.
Troubleshooting steps when the outdoor unit fan motor does not operate.
Troubleshooting steps when the compressor fails to operate.
Steps to address refrigerant or water leaks from the unit.
Steps to diagnose and resolve unusual noises or vibrations.
Detailed diagrams and lists of unit components.
Detailed list and diagrams of indoor unit components.
Detailed list and diagrams of outdoor unit components.
Step-by-step guides for disassembling the unit.
Step-by-step guide for disassembling the indoor unit.
Step-by-step guide for disassembling the outdoor unit.
Conversion table for temperature readings between Celsius and Fahrenheit.
Guidelines and specifications for connecting pipes.
Instructions on how to properly expand pipe ends for connection.
Resistance values for temperature sensors at various temperatures.
| Brand | Kinghome |
|---|---|
| Model | KW09HUCA4D |
| Category | Air Conditioner |
| Language | English |











