Do you have a question about the KingKutter S-500 and is the answer not in the manual?
Fields for purchaser to record machine details like name, model, and serial number.
Explains manual usage, safety signals, and the importance of original parts.
Describes the machine's name plate and its importance for spare parts.
Details machine construction, materials, and paint for durability and protection.
Identifies key seeder components using labels A-H.
Provides specifications like hopper capacity, weight, dimensions, and power requirements.
Key precautions for safe operation, maintenance, and handling of the machine.
Highlights critical safety messages, symbols, and personal protective equipment requirements.
Prohibits climbing or transporting people, and warns against entering the hopper during operation.
Stresses compliance with fertilizer product label instructions for transport, stock, and use.
States manufacturer's non-liability for improper use, modifications, or non-original parts.
Stresses checking PTO shaft protections and safe connection procedures.
Warns against being between tractor and spreader when running and checking safety devices.
Advises maintaining a 50m safety radius and stopping the tractor if someone approaches.
Mandates following highway codes, emptying hopper for road travel, and using warning flashers.
Advises cleaning tires and mechanisms to avoid road dirt and locking the rear lifter control lever.
Instructs to ensure safety labels are readable and replaced if damaged.
Lists and explains important safety signs and their meanings for operator safety.
Emphasizes checking tractor stability and raising ability before connecting the machine.
Provides guidance on PTO shaft length and angle for safe operation.
Details the step-by-step procedure for connecting the spreader to the tractor's 3-point hitch.
Stresses connecting the PTO shaft last and disconnecting it first.
Covers PTO shaft installation, use of CE marked shafts, and periodic greasing.
Reminds to check gear greasing before use.
Advises maintaining a 50-meter safety radius during operation.
Offers tips on testing application rates, using quality fertilizer, and avoiding windy conditions.
Explains how to adjust distributor vanes for even distribution based on fertilizer type and operator experience.
Presents charts for adjusting fertilizer and seed spreading based on speed and gate settings.
Describes how to adjust levers for left-side and right-side distribution.
Advises loading the hopper only after hitching the spreader and avoiding long-distance travel with a full load.
Stresses compliance with fertilizer product label instructions for transport, stock, and use.
Recommends wearing personal protective equipment during operation, maintenance, and storage.
Lists common operational errors like incorrect speed, width, disc position, and lack of cleaning.
Identifies issues related to fertilizer quality, composition, lumps, and foreign bodies.
Points out spreader-related errors such as clogged exits or worn/damaged discs.
Details safety precautions for maintenance, including stopping the engine and using PPE.
Advises using appropriate PPE for maintenance operations.
Shows the location for greasing and specifies grease type and frequency.
Provides instructions for replacing damaged spreader vanes, including reusing or replacing nuts and bolts.
Outlines steps for machine preparation before storage, including washing, inspection, and greasing.
Instructs to use only original spare parts and specifies information needed for ordering.
A table listing reference numbers, model numbers, and part numbers for seeder components.
An exploded view diagram showing the assembly of the seeder with numbered parts.
Table showing fertilizer spread quantity per acre based on speed and gate settings.
Table showing seed spread quantity per acre based on speed and gate settings.
Details warranty terms, exclusions, no other warranties, title, and risk allocation for the product.
| Brand | KingKutter |
|---|---|
| Model | S-500 |
| Category | Seeders |
| Language | English |