Kingspan SC100 User Manual

SOLARTHERMIE - SOLAR THERMAL - SOLAR TÉRMICO - SOLAIRE THERMIQUE - SOLARE TERMICO
Installation and operating instructions
Temperature difference controller
4 inputs, 2 outputs
728.138 | Z02 | 08.12 | Subject to change due to technical improvements!
EN
These operating instructions are part of the product.
Read these operating instructions carefully before use,
keep them over the entire lifetime of the product,
and pass them on to any future owner or user of this product.




Kingspan SC100 Specifications

General

Brand	Kingspan
Model	SC100
Category	Temperature Controller
Language	English

Summary

1 Safety

1.1 Proper Usage

Guidelines for correct and intended use of the controller.

1.2 Dangers During Assembly/Commissioning

Details risks associated with installation and initial setup.

1.3 Detecting Faults

Procedures for identifying and addressing system errors.

2 Case Overview

Device Components Overview

4 Installation

4.2 Assembly

Instructions for physically mounting the controller to its installation site.

4.3 Electrical Connection

Details on wiring the controller to the power supply and sensors.

4.5 Terminal Plan

Diagram showing all connection terminals and their functions.

5 Commissioning

5.1 Setting the Language

5.2 Setting the System Group

5.3 Setting the System

Procedure for selecting the specific solar energy system type.

6 Modes of Operation

6.2 "Automatic" Mode

Setting the controller for normal automated system operation.

6.3 "Manual" Mode

7 Settings

7.1 Systems

7.2 Functions

Detailed configuration options for various operational functions.

Back-up Heating

Quick Charge

Thermostat

Frost Protection

7.3 Parameters

Adjusting operational parameters to suit specific system requirements.

7.4 Storage Priority

8 Automatic Operation

8.1 Status Display

9 Fault Finding

9.1 Causes of Problems

Lists common issues and their potential causes and solutions.

10 Information Windows

11 Plausibility Indices

13 Technical Data

13.1 Performance Data

13.2 Parameter Settings

Detailed list of configurable parameters and their ranges.

13.3 Parameter Values for Functions