Need help?Do you have a question about the Kingspan SHE TRZ Plus 2A and is the answer not in the manual?
General| Brand | Kingspan |
|---|---|
| Model | SHE TRZ Plus 2A |
| Category | Control Panel |
| Language | English |
Covers regulations, transport, installation, operation, repair, and maintenance.
Details annual checks, authorized repairs, and essential maintenance.
Adherence to electrical safety laws, standards, and manufacturer guidelines for wiring.
Covers window safety, crush hazards, accident prevention laws, and environmental conditions.
Guidance on selecting cable types and wiring examples for control panel connections.
Covers SHE/ventilation, drive control, self-monitoring, and power backup features.
How manual call points and detectors trigger window opening/closing.
Operation of daily ventilation and resetting automatic detectors.
Automatic window closing on timer or failure, and related functions.
Explanation of status LEDs for operation, SHE activation, and malfunctions.
How wind/rain detectors trigger automatic window closure.
Graph to determine necessary cable length based on drive current.
Formula and examples for calculating cable cross-sections and selecting types.
Lists various devices connectable to the control panel, e.g., drives, detectors, call points.
Details connections for optional modules like wind-rain detectors and alarm systems.
Verifying wind/rain detector response to environmental changes and triggering window closure.
Checking SHE manual call point functions, activation, and reset operations.
Diagram for connecting 230V AC mains supply to the control panel.
Diagrams for connecting 24V DC drives, including single, multiple, and junction box configurations.
Diagrams for connecting magnetic locks that hold windows open or closed via spring force.
Diagrams for connecting magnetic clamps used for door holding or closing mechanisms.
Wiring diagrams for connecting LTA11 vent switches, both single and multiple units.
Wiring diagrams for connecting LTA25 vent switches, including jumper settings.
Diagram for wiring a single SHE manual call point with a monitoring resistor.
Diagrams for connecting multiple SHE manual call points in series for system expansion.
Diagram for connecting a single smoke detector and its monitoring resistor.
Diagrams for connecting multiple smoke detectors in a series loop with monitoring.
Diagrams for connecting the Fire Alarm System module (UEB3-1K-AE) with and without smoke detectors.
Wiring diagram for connecting an alarm buzzer to the control panel output terminals.
Wiring diagram for connecting a signal lamp to the control panel output terminals.
Diagrams for connecting wind/rain detectors and setting up jumpers and relay contacts.
Connecting potential-free contacts for SHE activation and malfunction messages.
Wiring for selector switch and two temperature sensors to control window hysteresis.
Wiring for selector switch and one temperature sensor for automatic window control.
Standard wiring for multisensor power and data connection to the panel.
Wiring multisensor via WRMAS for wind-rain detector power supply.
Comprehensive diagram showing all major component connections to the control panel.
Illustrates the two connection variants for the multisensor unit.
List of functions controlled by DIP-switches 1 through 12.
Detailed functions for DIP-switches 1, 2, 3, and the combined 3+9 setting.
Configuration for automatic ventilation upon main power failure.
Integration with FAS for open/reset signals and SHE activation.
Functions for pre-alert, actuation limit, malfunction, SHE reset, and inching mode.
STOP function for key-operated buttons and safety for power-operated windows.
Enabling detector monitoring with a 10kΩ resistor.
Automatic window closure after a set time following ventilation commands.
Details on switch combinations for specific operating modes like SHE/ventilation with stroke limits.
Initial checks of connections, ferrite core, battery, and LED status indicators.
Testing vent switch operations for opening, closing, and stopping window movements.
Guidance on interpreting LED indicators and common issues like loose connections or faulty switches.
Verifying SHE manual call point activation, LED indications, and acoustical signals.
Testing system behavior during mains failure, checking LEDs and automatic window closure.
Testing automatic detectors and automatic ventilation control based on DIP-Switch settings.
Testing wind/rain detector response to environmental stimuli and verifying window closure.
Testing activation of audible and visual alarms upon SHE activation.
Addresses issues like reversed vent switch function, no function, or mains/fuse problems.
Diagnosing issues based on LED status and interpreting malfunction beep codes.
Understanding maintenance timer status and indicator lamps for wind/rain signals.
Requirements for annual checks, cleaning, tightening, and trial runs for SHE systems.
Procedures for repairing defective equipment using only original spare parts.
Steps to take the SHE system out of order by disconnecting mains and battery fuse.
Provides overall dimensions and mounting hole details for TRZ Plus 2A and Comfort units.
Shows the front panel layout for TRZ Plus 2A and TRZ Plus Comfort units.
Dimensions and mounting details for the plastic housing compact control panel.
Dimensions and mounting details for the metal housing compact control panel.
Install in dry rooms, accessible locations, avoid projections, and ensure secure fixing.
Steps for mounting TRZ Plus units, setting height, and installing batteries correctly.
Wall mounting, housing fixation, and correct use of the ventilation plug.
Steps for mounting the metal housing panel and ensuring visibility and accessibility.
Installing rechargeable batteries using velcro tapes and connecting them with correct polarity.
Using PC interface for parameter adjustment, software/firmware dependency, and connection cable.
Interface for settings, system info, factory defaults, and error display.
Setting automatic ventilation time and its behavior with vent switch operation.
Configuring stroke limitation by run time for the OPEN direction.
Adjusting pause time for motor output polarity changes in milliseconds.
Password-protected activation/deactivation of the maintenance counter via the service interface.
User interface for viewing next planned service event and current service status.
Details on voltage, power consumption, and energy sources for primary and secondary supplies.
Output voltage, current, ripple, and power for drives, clamps, and call points.
Specifications for cable monitoring functions and call point output power.
Specifications for automatic alarm unit, buzzer, and signal lamp outputs.
Weight and dimensions of the control panels.
Temperature range, installation type, function retention, and IP protection ratings.
CE compliance, class of protection, and type testing compliance details.
Housing material, colour options, and halogen/silicon-free properties.
Specifications for TRZ WRMAS modules and consumer obligations for battery disposal.
Kingspan Light + Air contact information for the United Kingdom.
Kingspan Light + Air contact information for the Republic of Ireland.
To Next Page
