Need help?Do you have a question about the Kingst LA2016 and is the answer not in the manual?
General| Channels | 16 |
|---|---|
| Bandwidth | 100 MHz |
| Input Impedance | 1 MΩ |
| Data Upload | USB 2.0 |
| Trigger Modes | Edge, Pulse |
Explains what a logic analyzer is, its function, and how it differentiates from an oscilloscope.
Details the technical specifications for the LAx016 series logic analyzers.
Guides the user through the installation process of the Kingst VIS software and driver.
Details the steps for connecting the logic analyzer hardware to a computer via USB.
Explains how to connect the logic analyzer to the system being tested, emphasizing grounding.
Describes multipoint grounding techniques to improve measurement accuracy and reduce glitches.
Explains how to configure sampling depth and sampling rate for data acquisition.
Details how to set trigger conditions for capturing specific events during sampling.
Describes the process of starting sampling and obtaining the waveform data.
Details the configuration settings for the UART, RS232, and RS485 protocol analyzers.
To Next Page
