Kingwo LT03 - Terminal Management Commands; Usage Requirements; Operating Precautions and Limitations

LT03
12
*11*4#
Check terminal communication status
“Online” represent online
“Offline” represent offline
Link represent connect to the server
Ip, port, apn, terminal id, software version number followed by status
*22*1# terminal restore to factory
*22*4# Restart terminal
*77*0number#
Set center number 1
For example：*77*0123456# center number 1：123456
*77*0# delete center number 1
*77*2number#
Set center number 2
For example：*77*2123456# center number 2：123456
*77*2# delete center number 2
*77*4number#
Set the number1 to receive the SMS notification
For example：*77*4123456# SMS notified number1：123456
*77*4# delete SMS notified number1
*77*5number#
Set the number2 to receive the SMS notification
For example：*77*5123456# SMS notified number2：123456
*77*5# delete SMS notified number 2
IP,ip or dns,port,type#
Set the primary server IP, PORT, Communication type
A:Communication type 1:TCP 0: UDP
For example：IP,119.23.233.52,6000,1#
Set main server IP:119.23.233.52，PORT:6000，Communication type:
TCP
IP2,ip or
dns,port,type#
Set the backend server IP, PORT, Communication type
A:Communication type 1:TCP 0: UDP
For example：IP2,119.23.233.52,6000,1#
Set the Standby server IP 119.23.233.52,port 6000，Communication
type : TCP
Usage requirements
The terminal is strictly forbidden to use according to the operating instructions ,disassemble, collide,
charge, soak, over 80 °C, human failure, force majeure damage, etc. may cause short circuit, insufficient
working time, battery deformation, liquid leakage, explosion, no warranty and compensation will be
provided by Kingwo.
Contact us via:
Shenzhen Kingwo IoT co., LTD.
Address:7th Floor, Block A, R&D Building, Tsinghua Information Hi-Tech
Port, Nanshan District, Shenzhen, Guangdong, China
GPS Talks