Kinki Studio EX-M1 - Placement and Operation; Operational Voltage

2. Placement & Cold Start
KINKI STUDIO EX-M1 amplifier, like all high-quality amplifiers, generates a certain amount of
heat and must be properly dissipated. To ensure good heat dissipation and cooling, do not
place temperature sensitive equipment on top of the amplifier.
KINKI STUDIO
02
3. Operational Voltage
The normal working voltage of the EX-M1 is AC 100-120V for AC110 option, and AC
200V~245V for AC230 option. If your normal operating voltage is outside the above range,
please consult us.
The EX-M1 is protected by a fuse located at the IEC inlet, rated at 10A slow blow fuse.