Kinroad XT50QT-6G User Manual

-1-
FOREWORD ：
Thanks for your purchasing this motorcycle.
With the help of this manual, you will learn the
correct procedures of operation and basic knowledge of
maintenance and trouble shooting of the motorcycle. It
presents all the basic knowledge of maintenance and
trouble shooting of the motorcycle. It presents all
the details of the performance of this motorcycle to
you and the vehicle will make your life more relaxed
and happier.
In case any picture does not agree with the vehicle
physically, the latter shall prevail.
CAUTION．NOTE and MAIN POINTS carry special mean-
ings and should be carefully reviewed．
!CAUTION：The personal safety of the rider may be
involved，disregarding this information could result in
injury to the rider．
NOTE：These instructions point out special service
procedures or precautions that must be followed to
avoid damaging the machine．
MAIN POINTS ： Th is prov ides special inf ormation to m ake
mainte nance easier or impo rtant instructions clear er．
VIN AND
ENGINE SERIAL NUMBER LOCATION
The VIN and/or engine serial number are used to
register the motorcycle ． They are also use to assist
your dealer when ordering parts or special service
information.
The VIN is stamped on the front main beam of the
frame．
The engine serial number is stamped on the rear end
of the crankcase assembly
VIN. :

Kinroad XT50QT-6G Specifications

General

Brand	Kinroad
Model	XT50QT-6G
Category	Scooter
Language	English

Summary

Foreword and Important Notes

CAUTION

Personal safety warnings; disregard may result in injury.

NOTE

Special service procedures or precautions to prevent machine damage.

MAIN POINTS

Special information for easier maintenance or clearer instructions.

RULES FOR SAFE DRIVE

Handlebar and Instrument Panel Controls

Instrument Panel Operation and Indicators

Switches and Locking Mechanisms

Ignition Switch Operation

Operation of the ignition switch for starting, lights, and handlebar lock.

Handlebar Locking Procedure

Procedure for locking the handlebar to prevent theft.

Operating Switches and Lights

Engine Start Switch Operation

Procedure for starting the engine using the start switch.

Adding Fluids: Gasoline, Engine Oil, and Gear Oil

Adding Gasoline

Procedure for adding unleaded gasoline with a specific octane rating.

Engine Oil Requirements

Guidance on using special 2-stroke engine oil for optimal performance.

Correct Driving Operations

Engine Starting Procedure Overview

Step-by-step guide to starting the motorcycle's engine.

Pre-Starting Checks

Checks to perform before starting the engine for safety and functionality.

Engine Starting Details

Holding Levers and Throttle Control

Correctly holding levers and managing the throttle during engine start.

Engine Start Button Usage

Proper use of the start button and managing repeated attempts.

Engine Starting Techniques

Kick Starter Operation

Instructions for using the kick starter to start the engine.

Getting Ready to Drive

Releasing the Center Stand

Procedure for releasing the center stand after the engine starts.

Driving Preparation Steps

Steps for getting on the motorcycle and preparing to drive safely.

Observing Surrounding Safety

Checking surroundings for safety before starting to drive.

Adjusting Speed and Braking

Speed Adjustment with Throttle

How to adjust speed by rotating the throttle.

Using Front and Rear Brakes

Using front and rear brakes together for effective stopping.

Braking Techniques and Parking

Proper Braking Method

The correct way to squeeze brake levers and gradually reduce speed.

Sudden Braking and Turning Warning

Warning against sudden braking or turning to prevent slips or rollovers.

Parking and Securing the Motorcycle

Engine Shutdown and Signaling

Turning off the ignition switch and signals after parking.

Placing on Center Stand

Procedure for placing the motorcycle on the center stand.

Locking Steering Bar

Locking the steering bar to prevent theft.

Break-In Procedure

Break-in Period Guidelines

Break-in period: first month or 1000 km at speeds up to 45 km/h.

Avoiding Sudden Acceleration

Engine Start Troubleshooting

Pre-Drive Inspections

Fuel Level Check

Service if Engine Won't Start

Regular Inspection Schedule

Daily Inspection Checklist

Detailed Inspections

Brake Functionality Check

Tire Condition and Pressure Check

Component Checks

Engine Lubricant Level Check

Lamp and Turn Signal Functionality

Periodical Inspections

Inspection Intervals and Types

Brake and Tire Checks

Brake Lever Play Adjustment

Brake Functionality Test

Tire Pressure Check

Fluid and Component Checks

Transmission and Fuel Leak Checks

Engine Oil Level Check

Simple Maintenance Methods

Front & Rear Brake Adjustment

Fuse Replacement and Check

Fuse Replacement Procedure

Battery Safety and Air Cleaner Maintenance

Battery Usage Safety

Periodic Parts Replacement

Specifications

Overall Dimensions

Engine Specifications

Additional Specifications and Electrical Diagram

Performance and Capacity Details

Engine and Transmission Data

Electrical System Diagram