Kioti EX40 - Changing Front Axle Case Oil

10 -12 EX35/40/45/50
1. To drain the used oil, remove the
right and left drain plugs and filling
plug at the front axle case and drain
the oil completely into the oil pan.
2. After draining, reinstall the drain
plugs.
3. Remove the oil level check plug.
4. Fill with the new oil up to the check
plug port.(See "LUBRICANTS" in
Maintenance Section)
5. After filling, reinstall the filling plug
and check plug.
CHANGING FRONT AXLE
CASE OIL
(1) Check Plug (2) Filling Plug
(3) Drain Plug
T46OA19A
Oil Capacity 7.5 (1.9 U.S.gals.)