10
-11PERIODIC SERVICE
(1) Drain Plugs
1. To drain the used oil, remove the
drain plugs at the bottom of the trans-
mission case and differentials. Drain
the oil completely into a drain pan.
2. After draining reinstall the drain plug.
3. Fill with the new fluid to the upper
line of the gauge.
(See "LUBRICANTS" in Maintenance
Section)
4. After running the engine for a few
minutes, stop it and check the oil
level again; add oil to prescribed
level.
CHANGING TRANSMISSION
FLUID
T46OA18A
To avoid personal injury:
Allow engine to cool down suffi-
ciently, oil can be hot and can burn.
!!
!!
!
CAUTION
Do not operate the tractor im-
mediately after changing the
transmission fluid.
Run the engine at medium speed
for a few minutes to prevent dam-
age to the transmission.
IMPORTANT
Oil capacityModel
52
(13.7U.S gals.)
42
(11.1U.S gals.)
Manual
HST
T46OA46A
(1) Oil Filler Plug (2) Gauge
(A) Oil level is acceptable within this range
EX35
EX40
EX45
EX50
To Next Page
Loading...
