5
-32 EX35/40/45/50
1. The tractor has a 540 rpm speed
position.
2. Electric/Hydraulic engagement PTO
shifting needs clutch operation.
Press the clutch pedal down com-
pletely to stop the tractor movement
and any PTO driven equipment
movement before shifting the PTO
gear shift lever.
REAR PTO GEAR SHIFT LEVER
(1) Auto-Manual Switch
(2) PTO Switch
PTO OPERATION
To avoid personal injury:
Disengage PTO, stop engine, and
allow all rotating components to
come to a complete stop before
connecting, disconnecting,
adjusting, or cleaning any PTO
driven equipment.
!!
!!
!
CAUTION
T46O581A
PTO operation is controlled by the auto/
manual switch and the cutoff switch.
1. PTO connected - Auto
If the PTO clutch switch is turned to
AUTO position, when the attachment
is raised to the set position by the
position control lever, PTO is auto-
matically cut off.
2. PTO connected - Manual
If the PTO clutch switch is turned to
Manual position, PTO is operated
regardless of the height of the
attachment.
3. After setting the manual/Auto switch
to the desired setting, turn the PTO
switch “ON” o r “OFF” as required to
operate the PTO.
PTO CLUTCH SWITCH
To Next Page
Loading...
