5
-17
OPERATION
(4)CREEP GEAR SHIFT LEVER
HOW TO USE CREEP GEAR SHIFT
LEVER(OPTION-MANUAL Type)
If you misuse or mishandle the creep-
ing speed, it may cause damage to
the unit, so please note the following.
(3) RANGE GEAR SHIFT LEVER (HI-MID-
LO)
The range gear shift can only be shifted
when tractor is completely stopped and
clutch is depressed. If it is difficult to
shift the range gear, take the following
actions.
1. Be sure the range gear shift lever is
in neutral position.
2. Release clutch pedal(Manual type)
or slightly depress the speed con-
trol pedal to rotate the gears inside
of transmission. Release the speed
control pedal to neutral(HST only).
3. Depress clutch pedal(Manual type)
and then shift the range gear shift
lever.
To avoid transmission damage,
depress clutch pedal and stop
tractor before shifting between
ranges.
IMPORTANT
1. Possible times to use:
• A deep tilling application
• When unable to maintain a constant
speed in harsh field conditions
• Transplanting
• When loading and unloading
It may be easy to stall the engine
when operating the tractor in
high range at low engine rpm’s.
!!
!!
!
CAUTION
To Next Page
Loading...
