EasyManua.ls Logo

Kioti EX50 - CHECKING COOLANT LEVEL

Kioti EX50
132 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10
-6 EX35/40/45/50
1. The brake and clutch pedals should
be inspected for free travel, and
smooth operation.
2. You should adjust these pedals if an
incorrect measurement is found.
(See "adjusting clutch and brake
pedals" in the 100 hour maintenance
schedule.)
CHECKING BRAKE AND
CLUTCH PEDALS
Brake pedals should be equal when
depressed.
CHECKING COOLANT LEVEL
1. Check to see that the coolant level
is between the "FULL" and "LOW"
marks of recovery tank.
2. When the coolant level drops due to
evaporation, add water only up to the
full level.
In case of leakage, add anti-freeze
and water in the specified mixing ratio
up to the full level.
(See "Flush Cooling System and
Changing Coolant" in every 2 years
maintenance.)
(1) Recovery Tank
(A) FULL (B) LOW
To avoid personal injury:
Do not remove radiator cap
while coolant is hot. When cool,
slowly rotate cap to the first stop
and allow sufficient time for
excess pressure to escape be-
fore removing the cap
completely.
If the radiator cap has to be
removed, follow the caution
above and securely retighten the
cap.
Use clean, fresh water and anti-
freeze to fill the recovery tank.
If water should leak, consult
your local KIOTI dealer.
T46OA07A
!!
!!
!
CAUTION
NOTE
IMPORTANT

Related product manuals