Kioti K9 2400 User Manual

7
-29
MAINTENANCE
7
1. Park the vehicle on level ground
and apply the parking brake rmly.
2. Stop the engine and let the engine
cooled down sufciently.
CHECKING AND CHANGING REAR AXLE OIL (U)
3. Clean around filler plug, then re-
move the ller plug.
4. Check that the differential case
surface is not hot. Then, check the
oil level and condition with a nger
bent slightly. If you cannot reach
the oil, it means the oil level is low.
Add some oil.
(1) Filler Plug
5. If the color or viscosity of the oil is
not normal or it is at the oil change
interval, change the oil.
6. To change oil, place a container
with wide opening under the drain
plug. Then, remove the drain plug.
7. After draining all the oil, install the
drain plug rmly.
UUVO739A
(1) Drain Plug
U24O726A
(1) Funnel
8. W h e n a d d i n g n e w o i l , ad d it
through a long hose into the fill
plug location. Fill until oil starts to
spill out of ller plug hole.
9. Check the oil level by performing
the step 4 in the previous page. If
the oil level is normal, install the
ller plug.
Oil Capacity
0.21 U.S Gal. (0.8 L)
U24O727A
UD200(K9 2400)-유럽향-07.indd 29 2017-11-13 오전 11:10:45

Kioti K9 2400 Specifications

General

Brand	Kioti
Model	K9 2400
Category	Utility Vehicle
Language	English