4-2 KL120
INTRODUCTION
Warranty Registration
The Delivery and Warranty Registration forms must be filled out
and signed to validate your warranty protection. The items on the
form under "I hereby Acknowledge" should be read and understood.
The terms and conditions of the warranty on this machine are
specified in the front of this manual.
Serial Number and Location
The serial number is important information about the machine and
it may be necessary to know it before obtaining the correct re-
placement part. The serial number is located on the right side of
loader sub_frame. The serial number should be recorded on the
Delivery and Registration form and also below for your reference.
KIOTI KL120 Loader Serial Number Information
Date Purchased
Loader Serial Number
Dealer Name and Telephone Number
IMPORTANT
Illustrations used in this manual may not show all
safety equipment that is recommended to ensure
safe operation of tractor and loader. Refer to the Safety
Precautions section of this manual for information
concerning safety. consult your dealer for further
information.
The purpose of this manual is to assist you in maintaining and
operating your KIOTI loader. Read it carefully, it furnishes informa-
tion and instructions that will help you achieve years of dependable
performance. Some information may be general in nature due to
unknown and varying conditions. However, through experience
and these instructions, you should be able to develop operating
procedures suitable to your particular situation.
"Right" and "Left" as used throughout this manual are determined
by facing the direction the machine will travel when in use.
The photos, illustrations and data used in this manual are current at
the time of printing, but due to possible in-line production changes,
your machine may vary slightly in detail. The manufacturer re-
serves the right to redesign the machine as may be necessary
without notification.
To Next Page
Loading...