EasyManuals Logo

Kipor CG2000 User Manual

Kipor CG2000
74 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #26 background imageLoading...
Page #26 background image
3. If the oil level is low, add to the edge of the oil filler port.
Replace the engine oil
1. Disassemble the oil dipstick and oil drain bolt, drain out dirty oil.
2. Fix the oil drain bolt tightly.
3. Refill in clean oil. (oil capacity is 0.4L)
Recommended oil: SAE10W-30 or SAE30, API Service Classification SE, SF or SG.
4. Check the oil level; fill to the upper limitation level if necessary.
5. Tighten the oil dipstick.
Please dispose of the used motor oil in a manner that is compatible with the environment. We
suggest you take used oil in a sealed container to your local recycling center or service station for
reclamation. Do not throw it in the trash; pour it on the ground, or down a drain.
Drain the used oil while the engine is warm. Warm oil drains quickly and completely. Be attention that
the temperature should not be too high to avoid scalding.
21

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kipor CG2000 and is the answer not in the manual?

Kipor CG2000 Specifications

General IconGeneral
BrandKipor
ModelCG2000
CategoryPortable Generator
LanguageEnglish

Related product manuals