To Next PageTo Next Page
Need help?Do you have a question about the Kipor SINEMASTER IG2000 and is the answer not in the manual?
General| Rated AC Voltage | 230 V |
|---|---|
| Frequency | 50 Hz |
| Fuel Type | Gasoline |
| Starting System | Recoil |
| Dimensions | 498 x 290 x 459 mm |
| Weight | 22 kg |
| Rated Power | 1600 watts |
| Engine Type | 4-stroke, OHV |
| Continuous Operating Time | 4 h (at rated load) |
| Noise Level | 54-59 dB(A) at 7m |
| Outlet Types | 1 x 12 V DC outlet |
Key safety warnings regarding property damage, injury, or death.
Important operational advice for safe generator use and refueling.
Guidance on safe operation and understanding the manual.
Warning about carbon monoxide and hot engine components.
Precautions for handling flammable gasoline during refueling.
Procedure to check and refill engine oil to the correct level.
Instructions for checking fuel level and type, including ethanol.
Procedure for checking the air cleaner element for cleanliness and condition.
How to turn the engine switch ON and set the choke lever for starting.
Correct technique for pulling the starter grip to start the engine.
Importance and procedure for grounding the generator for electrical safety.
Rules for connecting appliances, extension cords, and avoiding household circuits.
Understanding AC output indicators and overload warnings.
Safety precautions for charging 12V batteries using the DC receptacle.
Explanation of the low oil alarm system and its function.
How the smart throttle system adjusts engine speed based on load.
Impact of altitude on performance and necessary adjustments.
How ambient temperature affects generator performance and operating limits.
Instructions for connecting two generators in parallel using cables.
Important cautions for parallel operation, cable use, and output.
Steps for changing the engine oil and proper disposal.
Procedure for cleaning and maintaining the air cleaner elements.
Guidance on inspecting, cleaning, gapping, and replacing spark plugs.
Safety precautions and requirements for transporting the generator.
Steps for preparing the generator for extended storage.
Troubleshooting steps for when the engine fails to start.
Steps to diagnose and resolve issues when appliances do not operate.
Procedure to check and fix issues with the DC receptacle.
Details on warranty duration, eligibility requirements, and coverage.
Contact information and required details for warranty service.
Items not covered by warranty and limitations on damages.
Steps for mounting the IG2000 accessory light kit.
