EasyManuals Logo

Kipor SINEMASTER IG2000 User Manual

Kipor SINEMASTER IG2000
50 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #20 background imageLoading...
Page #20 background image
18
The total wattage of all appliances connected must be considered.
Do not exceed the current limit specified for any one receptacle.
Do not connect the generator to a household circuit. This could cause the damage to the
generator or to electrical appliances in the house.
Do not modify or use the generator for other purpose than it is intended for. Also observe the
following when using the generator.
Do not connect an extension to exhaust pipe.
When an extension cable is required, be sure to use a rubber sheathed flexible cable (IEC
245 or equivalent).
Limit length of extension cables to 195 ft (60 m) for cables of 1.5mm
2
and 325 feet (100 m) for
cables of 2.5mm
2
. Long extension cables will reduce usable power due to resistance in the
extension cable.
Keep the generator away from other electric cables or wires such as commercial power
supply lines.
The DC receptacle can be used while the AC power is in use. If you use both at the same time,
be sure not to exceed the total power for AC and DC.
Most appliance motors require more than their rated wattage for start-up.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kipor SINEMASTER IG2000 and is the answer not in the manual?

Kipor SINEMASTER IG2000 Specifications

General IconGeneral
Rated AC Voltage230 V
Frequency50 Hz
Fuel TypeGasoline
Starting SystemRecoil
Dimensions498 x 290 x 459 mm
Weight22 kg
Rated Power1600 watts
Engine Type4-stroke, OHV
Continuous Operating Time4 h (at rated load)
Noise Level54-59 dB(A) at 7m
Outlet Types1 x 12 V DC outlet

Related product manuals