11
4. PRE-OPERATION CHECK
■ Be sure to check the generator on a level surface with the engine stopped.
1. Check the engine oil level.
■ Using non detergent oil or 2 cycle engine oil could shorten the engine's service life.
Use a high-detergent, premium quality 4-stroke engine oil, certified to meet or exceed U.S.
automobile manufacturer's requirements for API Service Classification SG/SF. Select the
appropriate viscosity for the average temperature in your area.
SAE Viscosity Grades
AMBIENT TEMPERATURE
Loosen the cover screw and remove the left side maintenance cover. Remove the oil filler cap,
and wipe the dipstick with a clean rag. Check the oil level by inserting the dipstick in the filler hole
without screwing it in.
If the oil level is below the end of the dipstick, refill the recommended oil up to the top of the oil
filler neck.
■ Running the engine with insufficient oil can cause serious engine damage.
Single
Viscosity
Multi-
viscosity
To Next Page
Loading...
Need help?
General
