Kipor SINEMASTER IG2000 User Manual

10
Serial number and bar code identification and location
The generator serial number identifies your particular unit and is important when
ordering parts and accessories. The bar code is used by your dealer and Coast
Distribution for warranty administration.
The serial number can be found stamped
on the engine block above oil dipstick. It
is visible when the service access door is
removed.
The bar code label is found in three
locations: on the bottom of the generator,
on the packing carton, and on the inside
cover of the operator’s manual.

Kipor SINEMASTER IG2000 Specifications

General

Rated AC Voltage	230 V
Frequency	50 Hz
Fuel Type	Gasoline
Starting System	Recoil
Dimensions	498 x 290 x 459 mm
Weight	22 kg
Rated Power	1600 watts
Engine Type	4-stroke, OHV
Continuous Operating Time	4 h (at rated load)
Noise Level	54-59 dB(A) at 7m
Outlet Types	1 x 12 V DC outlet