24
Smart Throttle System
When the smart throttle switch is placed in the on position, engine speed is kept at idle
automatically when the electrical load is disconnected and returns to the proper speed to match
the power of the electrical load when the load is reconnected. This position is recommended to
minimize fuel consumption while in operation.
■ The Smart throttle system does not operate effectively if the electrical appliance requires the
momentary electric power.
■ When high electrical loads are connected simultaneously, turn the Smart throttle switch to the
OFF position to reduce voltage fluctuation or shutdown.
■ In DC operation, turn the Smart throttle switch to the OFF position.
OFF:
Smart throttle system does not operate. Engine speed varies with the load.
Smart throttle switch
To Next Page
Loading...
