Name: Kipor SINEMASTER IG2000
Brand: Kipor
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Fig. 5

Note:

The required output of the electrical appliance cannot exceed the rated output of parallel

generators.

Shutting off the generators:

1. Turn off the power of electrical appliance, pull out the receptacle plug.

2. Turn off the two generators.

3. First disconnect the cable on the PARALLEL OUTPUT terminals of the two generators. And

then remove the PARALLEL I/O parallel connection cable.

· The special parallel cable for the IG2000p is only applicable to the parallel operation of two

IG2000p generators. It cannot be used for paralleling three or more generators or running two

different brands of generators.

Be sure to only use parallel output cable for parallel running.

· While connecting the generator and electrical appliance with the parallel output cable, do so

carefully and safely insert the plug into the receptacle.

· While operating in parallel, the only AC output is through the receptacle on the parallel cable

box. Don't use the receptacle on the control panel of the generator.

Questions and Answers:

Need help?

Do you have a question about the Kipor SINEMASTER IG2000 and is the answer not in the manual?

Kipor SINEMASTER IG2000 Specifications

General