35
■Never run the generator without the air cleaner, otherwise rapid engine wear may result.
1. Loosen the cover screw and remove the left side maintenance cover.
2. Remove the air cleaner cover and remove the fine and coarse elements.
3. Wash the elements in a non-flammable or high flash point solvent and dry it thoroughly.
4. Soak the elements in clean engine oil and squeeze out the excess oil.
5. Reinstall the coarse and fine air cleaner elements and the air cleaner cover. Tighten the cover
screw securely.
6. Reinstall the maintenance cover and tighten the cover screw securely.
MAINTENANCE
COVER
MAINTENANCE
COVER SCREW
IR CLEANER
BODY
IR CLEANER
COVER
IR CLEANER
COVER SCREW
IR CLEANER
ELEMENTS
ELEMENT