EasyManuals Logo

Kipor IG2000P Operation Manual

Kipor IG2000P
50 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #39 background imageLoading...
Page #39 background image
37
5. Visually inspect the spark plug. Discard it if the insulator is cracked or chipped.
Clean the spark plug with a wire brush if it is to be reused.
6. Measure the plug gap with a feeler gauge.
The gap should be 0.024-0.028in (0.6-0.7mm). Correct as necessary by carefully bending the
side electrode.
7. Install the spark plug carefully, by hand, to avoid cross-threading.
8. After a new spark plug has been seated by hand, it should be tightened 1/2 turn with a wrench
to compress its washer. If a used plug is being reinstalled, it should only require 1/8 to 1/4 turn
after being seated.
9. Reinstall the spark plug cap on the spark plug securely.
10. Reinstall the spark plug maintenance cover.
The spark plug must be securely tightened. An improperly tightened
plug can become very hot and possibly damage the generator.
Never use a spark plug with an improper heat range.
Never use a spark plug without damping resistance or it will cause
no AC output.

Other manuals for Kipor IG2000P

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kipor IG2000P and is the answer not in the manual?

Kipor IG2000P Specifications

General IconGeneral
BrandKipor
ModelIG2000P
CategoryPortable Generator
LanguageEnglish

Related product manuals