EasyManua.ls Logo

Kipor KDE180XW - Operation Procedure for Starting the Generator Set; Start (the preparation for this start is the same as the hand start.); Battery

Kipor KDE180XW
19 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3.5 Operation Procedure for Starting the Generator Set
--
If the start motor rotates for a long time and the
voltage of the battery will go down to cause the start
motor running hysteresis. When the diesel engine is in
operation, always leave the start key in ON position.
3.4.2.2. Battery
Check the electrolyte level height of the
battery once a month. When the liquid
level goes down to a lower mark, add
some distilled water to make that the
liquid level goes up to a higher mark.
If the electrolyte in the battery is too less,
the diesel engine will not start. Because the electric power is insufficient at this
time, it is necessary to keep the liquid is at a place between the higher limit and
the lower limit.
If the electrolyte in the battery is too much, the liquid may overflow and this may
corrode its surrounding components.
Attention should be paid to avoiding that the electrolyte is too much or is too less.
Charge the battery once a month.
CAUTION
Liquid Top Limit
Liquid Low Limit
--

Related product manuals