Kipor KDP30 User Manual

All information, illustrations, directions and specifications included in this publication are
based on the latest product information available at the time of approval for printing.
KIPOR POWER CO., LTD, reserves the right to make changes without incurring any obligation.
No part of this publication may be reproduced without written permission.
SERVICE MANUAL
www.kipor.com.au
For more information contact Customer Service on 1300 555 197
Distributed by
PRIMUS AUSTRALIA PTY LTD
Bundoora VIC 3083
www.primusaustralia.com.au

Kipor KDP30 Specifications

General

Model	KDP30
Max. Head	28m
Suction Head/Depth	8m
Starting System	Recoil start
Engine Model	KG390
Type	Water Pump
Inlet/Outlet Diameter	80mm (3 inch)
Max. Flow	60 m³/h
Engine Type	4-stroke, single cylinder, air-cooled
Max. Flow Rate	60 m³/h

Summary

Preface

Safety Instructions

General Operation and Fuel Safety

Covers essential safety practices for operating the pump and handling diesel fuel.

Fluid Pumping and Environmental Safety

Addresses safe pumping of liquids and maintaining safe distances during operation.

Identification of Components

Pre-Operation Check

Starting the Engine

Stopping the Engine

Maintenance

Changing Oil

Procedure for draining and refilling engine oil for maintenance.

Air Cleaner Service

Steps for cleaning or replacing the air cleaner element.

Battery Service

Guidance on recharging the battery for electric start models.

Transporting and Storage

Troubleshooting

Specifications

Warranty – Terms & Conditions