Need help?Do you have a question about the KIRLOSKAR DB 65/16 and is the answer not in the manual?
General| Model | DB 65/16 |
|---|---|
| Discharge Size | 65 mm |
| Material | Cast Iron |
| Voltage | 415 V |
| Frequency | 50 Hz |
| Impeller Type | Closed Type |
| Shaft Material | Stainless Steel |
| Phase | 3-phase |
General safety information and identification of safety symbols.
Procedures for installation, qualified personnel, manual reading, PPE, and operational cautions.
Safety practices for operating equipment, transport, handling, and storage.
Highlights severe risks associated with incorrect installation, operation, or maintenance.
Lists essential checks before starting the pump, including rotation and connections.
Focuses on pump troubles, their causes, and troubleshooting steps based on field experience.
Warns against using equipment beyond specified capacities and highlights risks of exceeding limits.
Explains various priming methods and the importance of priming before starting the pump.
Provides a table to identify causes of pump breakdown and corresponding check points.
To Next Page