Need help?Do you have a question about the KIRLOSKAR DB 80/26 and is the answer not in the manual?
General| Model | DB 80/26 |
|---|---|
| Head | 26 m |
| Voltage | 415 V |
| Material | Cast Iron |
| Speed | 2900 rpm |
| Suction Size | 80 mm |
| Delivery Size | 80 mm |
| Flow Rate | 800 lpm |
| Power | 7.5 kW |
| Phase | Three Phase |
| Head Range | Up to 26 m |
| Discharge | 800 lpm |
General safety advice and requirements for understanding instructions.
Warnings about loose clothing, jewelry, and hazardous operations.
Steps and checks for starting, running, and stopping the pump.
Safety precautions and hazard awareness during maintenance activities.
Troubleshooting common pump problems and their causes.
General warning about equipment usage beyond specified capacities.
Importance and procedures for pump and driver shaft alignment.
Procedures for stuffing box cleaning, packing, and sealing.
Methods for priming the pump casing and suction pipe before operation.
Crucial step of ensuring the pump is primed before starting.
Common causes of pump issues, often related to faulty installation.
Table listing pump problems and corresponding check points.
Detailed list of potential issues and their causes for pump troubleshooting.
To Next Page