Need help?Do you have a question about the KIRLOSKAR DB 125/32 and is the answer not in the manual?
General safety guidelines, symbols, and installation area requirements.
Highlights severe risks like injury or death from improper operation.
Covers personal protective equipment, safe handling, and storage procedures.
Procedures for installing, mounting, and aligning the pump unit.
Steps for pre-start checks, starting, running, and stopping the pump.
Safety during maintenance, overhauling, dismantling, and reassembly.
Outlines periodic checks to minimize failures and breakdowns.
Diagnosing pump troubles and identifying breakdown causes and check points.
Details pump models, specifications, bearings, and lubrication.
Lists spare parts and provides cross-sectional and exploded views.
Guidelines for installation layout, suction pipes, and delivery piping.
Methods for priming the pump and procedures for starting.
General safety guidelines, symbols, and installation area requirements.
Highlights severe risks like injury or death from improper operation.
Covers personal protective equipment, safe handling, and storage procedures.
Procedures for installing, mounting, and aligning the pump unit.
Steps for pre-start checks, starting, running, and stopping the pump.
Safety during maintenance, overhauling, dismantling, and reassembly.
Outlines periodic checks to minimize failures and breakdowns.
Diagnosing pump troubles and identifying breakdown causes and check points.
Details pump models, specifications, bearings, and lubrication.
Lists spare parts and provides cross-sectional and exploded views.
Guidelines for installation layout, suction pipes, and delivery piping.
Methods for priming the pump and procedures for starting.
General| Model | DB 125/32 |
|---|---|
| Type | Centrifugal Pump |
| Suction Size | 125 mm |
| Head | Up to 32 m |
| Material | Cast Iron |
| Voltage | 415 V |
| Frequency | 50 Hz |
| Phase | Three Phase |
| Application | Industrial |
To Next Page