Need help?Do you have a question about the KITA KFP01 Series and is the answer not in the manual?
Overview of general safety guidelines and warnings to prevent hazards.
Guidelines for safe operation in specific environments and with different fluids.
Safety guidelines related to wiring the sensor to prevent damage or malfunction.
Safety measures to follow during the physical installation of the sensor.
Guidelines for safe maintenance and handling of the sensor.
Safe and regulatory compliant procedures for product disposal.
Specific warnings and advice related to handling various fluids with the sensor.
Detailed steps for connecting the sensor to the piping system, including fitting types.
Guidance on mounting the sensor and available optional accessories.
Schematics illustrating proper wiring connections for different output types.
Identification and function description of each part of the sensor unit.
Explanation of various functions and their settings available on the sensor.
Step-by-step instructions for configuring sensor settings via the interface.
Detailed settings for Output 1, including sensor type and output mode.
Specific settings for using a pressure sensor with Output 1.
Detailed settings for Output 2, including sensor type and output mode.
Options for customizing the display color of the sensor's LCD screen.
Adjusting the sensor's response time to prevent output chattering.
Setting the refresh rate of the sensor's display for stability.
Configuring the units for flow rate and pressure display.
Choosing between standard (ANR) or normal (NOR) conditions for flow measurement.
Selecting whether the analog output corresponds to flow or pressure.
Enabling storage of accumulated flow values when power is off.
Choosing between instantaneous or accumulated flow display modes.
Activating power-saving mode to reduce display power consumption.
Configuring external input for functions like reset or auto-shift.
Configuration of Modbus RTU protocol parameters like ID, baud rate, and format.
Calibrating display values for flow and pressure within ±2.5% R.D.
Testing the switch function by forcing outputs ON or OFF.
Restoring the sensor's factory default settings.
Adjusting the pressure display value to zero within specified tolerance.
Adjusting the instantaneous flow display value to zero within specified tolerance.
Resetting the accumulated flow value to zero.
Displaying and holding the maximum detected pressure or flow.
Displaying and holding the minimum detected pressure or flow.
Preventing unintentional changes to settings by locking control buttons.
Details on mounting brackets, panel adapters, and cut-out dimensions.
General| Brand | KITA |
|---|---|
| Model | KFP01 Series |
| Category | Accessories |
| Language | English |
To Next Page