1
q
With a detector tube inserted and the handle drawn back, the pump cylinder is
under a high vacuum. If the handle lock is released under vacuum conditions, it
will pull back suddenly. Holding the pump by the extended shaft can lead to
injury. Always hold the pump by the cylinder, never by the shaft.
w
Broken glass tube tips can fall from the tip cutter or storage area when using the
pump. To prevent glass contamination in restricted area (e.g., food processing
plants) use the optional Model B-191 Tip cutter.
e
Normal use of detector tubes requires the handling of broken glass tubes.
Safety glasses and protective gloves are recommended.
r
Detector tubes contain small amounts of chemical reagents, which may be
toxic. Avoid skin and eye contact with the internal chemical reagents.
■
FOREWARD
Thank you for purchasing the Model AP-20 sampling pump. The Model
AP-20 pump is designed specifically for use with Kitagawa detector
tubes. This system with the available Kitagawa detector tubes can
detect the presence of more than 300 airborne gases and vapours.
■
FOR SAFE AND CORRECT USE
★
READ CAREFULLY BOTH THIS INSTRUCTION MANUAL AND THE
INSTRUCTION SHEETS FOR THE INDIVIDUAL DETECTOR TUBES
PRIOR TO USE OF THIS PRODUCT.
★
ENSURE THAT THIS INSTRUCTION MANUAL IS STORED IN A
CONVENIENT LOCATION FOR EASY REFERENCE AT ALL TIMES.
★
IF YOU HAVE ANY QUESTIONS REGARDING THIS MANUAL,
PLEASE CONTACT YOUR LOCAL DISTRIBUTOR, DEALER OR
MANUFACTURER REPRESENTATIVE.
This instruction manual uses the following symbols to
indicate cautions and notes that promote the safe and
correct use of this product.
This “Caution” symbol indicates that failure to
observe this instruction can result in possible
personal injury or damage to property.
This “Note” symbol indicates instruction or advice
for the correct use of the product, to prevent
problems with the products or its interpretation.
Caution
Note
Caution
To Next Page
Loading...