Need help?Do you have a question about the Kitagawa HG-A97-212 and is the answer not in the manual?
Identifies the specific model covered by the instruction manual.
Explains safety message terminology and symbols used in the manual.
Outlines the product warranty period and limitations of the manufacturer's liability.
Critical safety measures for power supply, spindle operations, and speed limits.
Guidelines for safe input force, work handling, and workpiece support.
Ensuring system compatibility and managing workpiece balance for safe operation.
Proper bolt tightening and draw pipe specifications for secure chuck operation.
Using appropriate cylinder valves and prohibiting unauthorized chuck modifications.
Rules for safe operation, including personal conduct and attire.
Detailed diagram showing the physical components and layout of the chuck.
Comprehensive list of all parts included with the chuck, with quantities and specifications.
Explanation of the maximum gripping force achievable when the chuck is stationary.
Specifies the maximum safe rotation speed for the chuck during operation.
Analysis of how gripping force changes with rotation speed, including centrifugal effects.
Examines how gripping force is affected by jaw height, mass, and input force.
Steps for preparing the ring used in the soft jaw forming process.
Procedure for shaping the ring to be gripped by the chuck jaws.
Method for securely gripping the forming ring during the process.
Adjusting the center height of the gripping part on the soft jaw.
The process of forming the gripping part of the work using the ring.
Performing trial cuts to verify precision and check for slips.
Steps for attaching the cylinder and draw-pipe to the spindle and securing the chuck.
Procedure for screwing the draw pipe to the plunger and setting the gap.
Method for adjusting the jaw stroke if it is found to be short.
Instructions for attaching locators and jigs to the chuck surface, including torque specifications.
Regular checks and maintenance tasks for the chuck.
Guidance on where and how to lubricate the chuck, and recommended grease types.
Step-by-step guide for safely disassembling the chuck for maintenance or repair.
General| Brand | Kitagawa |
|---|---|
| Model | HG-A97-212 |
| Category | Power Tool Accessories |
| Language | English |
To Next Page