EasyManua.ls Logo

Kitchen Queen Stove User Manual

Default Icon
9 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Question and Answer IconNeed help?

Do you have a question about the Kitchen Queen Stove and is the answer not in the manual?

Kitchen Queen Stove Specifications

General IconGeneral
BrandKitchen Queen
ModelStove
CategoryKitchen Appliances
LanguageEnglish

Summary

Owner's Manual Introduction

Important Safety Precautions

Clearance to Combustibles

Appliance Clearances

Minimum distances from stove to combustible surfaces.

Chimney Connector Clearances

Safe distances for chimney pipe connections.

Starting Your First Fire

Initial Fire Setup

Instructions for opening smoke outlet and draft controls.

Safety Warnings for Older Stoves

Clearances for Older Stoves (Pre-August 2014)

Appliance Clearances (Older Models)

Specific clearances for stoves manufactured before August 2014.

Chimney Connector Clearances (Older Models)

Safe chimney pipe distances for older stove models.

First Fire Procedure (Older Stoves)

Initial Fire Setup (Older Models)

Instructions for starting the first fire on older stove models.

Additional Tips and R-Factor Calculation

General Operating Tips

Advice on pipe setup, fire building, and wood preparation.

Determining Floor Protector R-Value

Procedure to calculate R-values for floor protector materials.

Operational Procedures and Maintenance

First Fire Continuation

Further instructions for starting the initial fire and fuel.

Creosote Management

Explanation of creosote formation and inspection needs.

Ash Handling

Proper methods for managing and disposing of ashes.

Oven Usage and Troubleshooting

How to use the oven and common issues.

Stove Cleaning and Care

Daily and long-term maintenance for stove surfaces.

Chimney Connector and Vent Systems

System A: Masonry Chimney

Clearances for factory-built connectors in masonry chimneys.

System B: Factory-Built Chimney

Clearances for insulated factory-built chimney systems.

System C: Sheet Steel Connector

Clearances for sheet steel connectors with ventilated thimbles.

System D: Factory-Built Pass-Through

Clearances for factory-built chimney sections as pass-throughs.

Typical Chimney Installations

Replacement Parts List