KitchenAid 5KEK1222 - Operating the Electric Kettle; Preparation Before First Use; How to Heat Water

10
OPERATING THE ELECTRIC KETTLE
Before rst use
Heating water
Before first use, fill the Electric Kettle to the maximum level, then boil and discard the water.
NOTE: The Electric Kettle is designed for water only. Do not put any other liquids
or substances in the Electric Kettle.
3
Place the electric kettle on the base.
4
Turn the electric kettle ON by pressing
the ON/OFF switch down. The LED
indicator will light.
Kettle will automatically turn OFF when
water has finished boiling.
1
Remove the lid from the kettle. Fill the
electric kettle with water.
2
Replace the lid.
6
Unplug cord when Electric Kettle is
not in use.
5
You may also turn it off by raising the
switch to the OFF position.
CARE AND CLEANING
W10705117B_v03.indd 10 1/2/18 11:40 AM