OPERATING THE ELECTRIC KETTLE | 7
BEFORE FIRST USEBEFORE FIRST USE
1
Open the lid of the Electric Kettle by
pressing the Lid Release Button.
2
Fill Electric Kettle. The water level is
displayed in .25 L increments. If there is
no water in the kettle, the water drop
icon will display and the alert tone will
sound for 6 seconds. Remove water if it
exceeds the “Max” line.
3
Push the lid down so it locks into the
closed position. You will hear a clicking
sound which indicates the lid is locked.
4
Place the Electric Kettle on the base.
OPERATING THE ELECTRIC KETTLE
Before first use, fill the Electric Kettle to the maximum level, then boil and discard the water.
The temperature can be displayed in Celsius (C) or Fahrenheit (F). To change setting, hold
the “-” and “+” buttons down at the same time.
NOTE: The Electric Kettle is designed for water only. Do not put any other liquids or
substances in the Electric Kettle.
FILLING THE ELECTRIC KETTLE WITH WATER
NOTE: There must be a minimum of .25 L of water for Electric Kettle to operate. Do
not exceed the “Max” fill line.
W10597348C_EN.indd 7 12/18/2018 4:36:30 PM
To Next Page
Loading...
