English
8
Preparing the Food Processor for Use
7. Plug into a proper electrical outlet
(see
“
Electrical Requirements” on
page 3).
NOTE: Your Food Processor will not
operate unless the work bowl and
work bowl cover are properly locked
on the base, and the pusher is
inserted to the maximum fill line on
the feed tube.
Do not remove the work bowl
from the base without first removing
the work bowl cover. Damage to the
work bowl may result.
Multipurpose Blade and
Dough Blade Assembly
Place the blade on the power shaft.
Rotate the blade so it falls into place
on the shaft.
Slicing and Shredding Disc
Assembly
1. Place the disc stem on the power
shaft.
To Next Page
Loading...
