INSTALLATION REQUIREMENTS
Location Requirements
Product Dimension
Select a location that provides minimum exposure to wind
and traffic paths. The location should be away from strong
draft areas.
Do not obstruct flow of combustion and ventilation air.
Clearance to combustible construction for grill:
A minimum of 24” (61 cm) must be maintained between
the front of the grill hood, sides and back of the grill
and any combustible construction.
A 24” (61 cm) minimum clearance must also be
maintained below the cooking surface, and the grill
shall not be used under overhead combustible
construction.
23
The model/serial number rating plate is located on the inside of the
left cabinet door. See the following illustration.
A .Model/serial number plate
A
To Next Page
Loading...
