To Attach Glass Bowl to Mixer
Guide To Attaching GLASS Bowl
Before Using
− Your Stand Mixer is individually adjusted at the factory for optimal performance.
When using the Glass Bowl, it may be necessary to readjust the Beater to Bowl
clearance. Ensure your bowl is securely attached to the mixer. When correctly
positioned, the handle and pour spout should not touch the pedestal of the mixer.
Please refer to the “Use and Care” Guide for complete instructions on adjusting the
Beater to Bowl clearance.
− For Frosted and Hammered Glass Bowls,
remove the Thread Ring before using in a
microwave.
Tips For Use
− Bowl and Thread Ring are dishwasher-safe top
rack only.
Quick Guide for using
the Glass Bowl
For use with the Tilt-Head Stand Mixers only.
Not for use with model KN1PS (Accolade Series)
0 Stir 2 4 8 10
1. Turn OFF Stand Mixer.
2. Unplug Stand Mixer.
3. Align Glass Bowl and twist in place.
− To avoid product damage, do not use the
Glass Bowl in areas of high heat, such as an
oven or on a stove top.
CARE AND CLEANING
W11282963A.indd 1 7/24/2018 3:15:59 PM
To Next Page
Need help?
General
